• Heavy duty EMPI cast steel Full Flow oil pump cover

Heavy duty EMPI cast steel oil pump cover is tapped for a full flow oil system fits all VW pumps with 8mm bolt holes.

Fitting and gasket included.

Write a review

Note: HTML is not translated!
   Bad           Good
Captcha

Heavy duty EMPI cast steel Full Flow oil pump cover

  • Brands EMPI
  • Product Code:EMPI-31-2940
  • Availability:In Stock
  • $102.82

  • Ex Tax:$89.41

Related Products

Full Flow Oil Pump

Full Flow Oil Pump

EMPI Full Flow Oil Pump for engines fitted with a "flat camshaft wheel" (Stock engines up to 1970 or..

$0.00 Ex Tax:$0.00

VW Engine Case Heavy Duty "Bubble Top" 90.5/92mm

VW Engine Case Heavy Duty "Bubble Top" 90.5/92mm

Engine Case, with 10mm or 8mm head studs bosses, and spigots for  90.5/92mm cylinders..

$0.00 Ex Tax:$0.00

90˚ Oil fitting NPT 3/8" Male x 3/8" Female

90˚ Oil fitting NPT 3/8" Male x 3/8" Female

NPT 3/8" Male x 3/8" Female. Sold each This 90˚ fitting is a low profile back and is ideal for the..

$22.98 Ex Tax:$19.98

Spin on oil filter mount ports left

Spin on oil filter mount ports left

Mounts a standard spin-on oil filter on the location of your choice on your Volkswagen. In and out..

$54.23 Ex Tax:$47.16

Spin on oil filter mount ports right

Spin on oil filter mount ports right

Mounts a standard spin-on oil filter on the location of your choice on your Volkswagen. In and out f..

$54.23 Ex Tax:$47.16

Oil return adaptor for full flow systems Type 1 Case

Oil return adaptor for full flow systems Type 1 Case

Designed to add a full flow oil system without machining the crankcase. Screws into the rear oil b..

$110.31 Ex Tax:$95.92

Oil Pump 26mm gear 8mm stud holes (Flat Camshaft)

Oil Pump 26mm gear 8mm stud holes (Flat Camshaft)

Schadek 26mm Oil Pump, 8mm Pump Studs fits late Type 1/2/3s with 1500-1600cc based engines. A 26mm p..

$141.40 Ex Tax:$122.96

VW Engine Case Heavy Duty "Bubble Top" 94mm

VW Engine Case Heavy Duty "Bubble Top" 94mm

Engine Case, with 10mm or 8mm head studs bosses, and spigots for 94mm cylinders Constructed from a ..

$0.00 Ex Tax:$0.00

Oil Thermostat

Oil Thermostat

Mounts in-line and bypasses oil cooler until oil warms up to approximately 175F degrees. Always par..

$180.21 Ex Tax:$156.70

Oil Hose/line 1/2" High temperature and High pressure (300mm increments)

Oil Hose/line 1/2" High temperature and High pressure (300mm increments)

High Temperature / High Pressure Oil Hose for use with oil coolers and/or remote oil filter.  ..

$11.39 Ex Tax:$9.90

Oil Cooler Sandwich Plate with Thermostat

Oil Cooler Sandwich Plate with Thermostat

Features:   • 80 ˚C thermostat • 3/4 UNF oil filter thread • 5/8 BSP pipe fit..

$140.93 Ex Tax:$122.55

Thread Sealant 50mls

Thread Sealant 50mls

LOCTITE 567 Off-white, low disassembly strength methacrylate thread sealant, ideal for sealing coar..

$34.01 Ex Tax:$29.57

VW Oil Pump 30mm gears and 8mm stud holes

VW Oil Pump 30mm gears and 8mm stud holes

Schadek 30mm Oil Pump, 8mm Pump Studs   This pump  fits late Type 1/2/3s with 1500-1600cc based en..

$140.52 Ex Tax:$122.19

Brass 3/8" Tail end for oil lines

Brass 3/8" Tail end for oil lines

There are manufactured using a special beaded barb design to provide an unparalleled security a..

$11.48 Ex Tax:$9.98

Oil Pump 26mm gear 8mm stud holes (Dished Cam)

Oil Pump 26mm gear 8mm stud holes (Dished Cam)

Schadek 26mm Oil Pump, 8mm Pump Studs fits late Type 1/2/3s with 1500-1600cc based engines. A 26mm p..

$101.79 Ex Tax:$88.51

VW Dry Sump Oil Pump CB Performance

VW Dry Sump Oil Pump CB Performance

The oil pump that helps your engine make power.   CB's 4 Gear Dry Sump Oil Pump is easy to install..

$0.00 Ex Tax:$0.00

Oil Cooler 16 Row 8AN AN-8 Fittings -Black

Oil Cooler 16 Row 8AN AN-8 Fittings -Black

Additional 16 row oil cooler. Overall dimensions 340 x 150 x 50 mm. Thread of the inlet an..

$0.00 Ex Tax:$0.00

Oil Fitting -8AN to 3/8 NPT (Black)

Oil Fitting -8AN to 3/8 NPT (Black)

Brand new aftermarket product.Made of high quality aluminium.Color: Black8AN to 3/8'' NPT (Male to M..

$14.46 Ex Tax:$12.57

Fitting Hose End 90 Degree Full Flow -8AN (Black)

Fitting Hose End 90 Degree Full Flow -8AN (Black)

Brand new aftermarket product.High Flow versionMade of high quality aluminium.Color: Black-8AN Swive..

$42.06 Ex Tax:$36.57

-8AN Straight Female Aluminium Hose End (Black)

-8AN Straight Female Aluminium Hose End (Black)

Brand new aftermarket product.Made of high quality aluminium.Color: Black-8AN Female to -8AN Hose St..

$19.06 Ex Tax:$16.57

Full Flow Filter mount VW Beetle's to 1973

Full Flow Filter mount VW Beetle's to 1973

Under rear guard Oil Filter Mount, Beetle up to 1973EMPI'S Bolt On Full Flow Oil Filter Mounts Make ..

$54.34 Ex Tax:$47.25

VW Engine Case Heavy Duty "Bubble Top" 94mm machined for Sand Seal

VW Engine Case Heavy Duty "Bubble Top" 94mm machined for Sand Seal

Engine Case, with 10mm or 8mm head studs bosses, and spigots for 94mm cylinders and machined for san..

$0.00 Ex Tax:$0.00

Fitting Hose End 90 Degree  -8AN (Black)

Fitting Hose End 90 Degree -8AN (Black)

Made of high quality aluminium.Color: Black-8AN Swivel to 3/8'' NPT -8AN ..

$32.86 Ex Tax:$28.57

VW Engine Case Heavy Duty "Bubble Top" 90.5/92mm With Sand Seal machined snout

VW Engine Case Heavy Duty "Bubble Top" 90.5/92mm With Sand Seal machined snout

Engine Case, with 10mm or 8mm head studs bosses, and spigots for  90.5/92mm cylinders..

$2,530.00 Ex Tax:$2,200.00

Oil Pump 21mm gear 8mm stud holes (Flat Cam) - Dual releif case 15mm inlet galley

Oil Pump 21mm gear 8mm stud holes (Flat Cam) - Dual releif case 15mm inlet galley

Schadek 21mm Oil Pump, 8mm Pump Studs fits late Type 1/2/3s with 1500-1600cc based engines.Fits 1970..

$117.96 Ex Tax:$102.57

Tags: oil, pump, cover, steel, plate, full, flow, oil, filter,