• VW Cam follower (Lifter) with extra oil hole (Set of 8)

Made from one piece Chromoly billets and then precision ground and heat treated.

These are the strongest cam followers available.

In addition this lifter has an oil hole in the face for extra lubrication for those high load, hi-performance applications.

Sold as a set of 8

Write a review

Note: HTML is not translated!
   Bad           Good
Captcha

VW Cam follower (Lifter) with extra oil hole (Set of 8)

  • Brands EMPI
  • Product Code:EMPI-21-4305
  • Availability:In Stock
  • $208.47

  • Ex Tax:$181.28

Related Products

Stock VW Exhaust Valve, 32mm

Stock VW Exhaust Valve, 32mm

Stock VW Exhaust Valve, 32mm These are a replacment must for any engine rebuild as old valves can f..

$32.44 Ex Tax:$28.21

44mm Stainless Valves Set of 4

44mm Stainless Valves Set of 4

The best forged one piece stainless valves money can buy. Precision machined featuring a swir..

$0.00 Ex Tax:$0.00

Oil Pump Cover Steel

Oil Pump Cover Steel

VW Oil Pump Cover  Fits all 8mm stud oil pumps, good to replace your old worn pump cover and g..

$25.07 Ex Tax:$21.80

VW High Performance Hardened Valve Keepers

VW High Performance Hardened Valve Keepers

Precision Fit And Heat Treated Valve Locks Prevent Valve Groove Wear And Failure. Compatible With St..

$22.94 Ex Tax:$19.95

VW Threaded case oil plug gallery kit

VW Threaded case oil plug gallery kit

This kit is the first step to any quality engine build. By installing this 12-peice oil galley..

$52.76 Ex Tax:$45.88

VW Engle W110 Camshaft

VW Engle W110 Camshaft

Lift 430, Duration 284. Hot street & off road, good low & mid..

$0.00 Ex Tax:$0.00

Cam gear bolts (Set of 3)

Cam gear bolts (Set of 3)

Camshaft gear bolts for VW Volkswagen bolt on aluminum cam gears. Sold as a set of 3. Use locktite w..

$4.49 Ex Tax:$3.90

VW Main Bearing Set Type 1 based engine +80" and -10" on the crank (2mm Thrust)

VW Main Bearing Set Type 1 based engine +80" and -10" on the crank (2mm Thrust)

1200-1600cc Main Bearings Set, Steel backed for extra strength , these bearings are a excellent bear..

$165.80 Ex Tax:$144.17

VW Main Bearing Set Type 1 based engine +100" on case, -20" on Crank with .080" Thrust

VW Main Bearing Set Type 1 based engine +100" on case, -20" on Crank with .080" Thrust

1200-1600cc Main Bearings Set, these bearings are a excellent bearing for any rebuild on a line..

$134.52 Ex Tax:$116.97

Main Bearing Set VW Type 1 based engine +20 and standard on the crank (2mm thrust)

Main Bearing Set VW Type 1 based engine +20 and standard on the crank (2mm thrust)

VW 1200-1600cc Main Bearings Set, Steel backed for extra strength , these bearings are a excell..

$165.27 Ex Tax:$143.71

VW Stock grind camshaft with gear, New not rebuilt

VW Stock grind camshaft with gear, New not rebuilt

Fits 1200cc (40hp)-1600cc Type 1/2/3 Engines Stock grind camshaft new with gear. "Flat Cam" for en..

$284.97 Ex Tax:$247.80

VW Engine Case Heavy Duty "Bubble Top" 90.5/92mm

VW Engine Case Heavy Duty "Bubble Top" 90.5/92mm

Engine Case, with 10mm or 8mm head studs bosses, and spigots for  90.5/92mm cylinders..

$0.00 Ex Tax:$0.00

Bolt-On aluminium cam gear

Bolt-On aluminium cam gear

This Bolt-On aluminium cam gear cam is made from high quality aluminium and precision machined ..

$104.52 Ex Tax:$90.89

VW Heavy Duty Aluminium Pushrods Cut to Length

VW Heavy Duty Aluminium Pushrods Cut to Length

Heavy Duty Aluminium Pushrods are the strongest Aluminium Push Rods available for Aircooled Engines...

$342.95 Ex Tax:$298.22

VW Camshaft bearing set Standard Type 1 engines

VW Camshaft bearing set Standard Type 1 engines

Camshaft bearing set Standard Type 1 Based engines..

$57.36 Ex Tax:$49.88

VW Engine Case Heavy Duty "Bubble Top" 94mm

VW Engine Case Heavy Duty "Bubble Top" 94mm

Engine Case, with 10mm or 8mm head studs bosses, and spigots for 94mm cylinders Constructed from a ..

$0.00 Ex Tax:$0.00

Performance CamShaft 380L / 233D for 1.1 Rockers performance (Stage 1)

Performance CamShaft 380L / 233D for 1.1 Rockers performance (Stage 1)

Mild Street Performance Cam for your Air Cooled Type 1 VWVery close in design specification to the w..

$286.98 Ex Tax:$249.55

High Performance Camshaft kit Stage 1

High Performance Camshaft kit Stage 1

This kit is a great way to buy all you need in an engine build at a discounted price as it's in a pa..

$539.98 Ex Tax:$469.55

EMPI High Performance Camshaft kit W-110

EMPI High Performance Camshaft kit W-110

This kit is a great way to buy all you need in an engine build at a discounted price as it's in a pa..

$0.00 Ex Tax:$0.00

Camshaft bearing set Standard with Double thrust

Camshaft bearing set Standard with Double thrust

Stock VW Cam bearings only had 1 thrust bearing, this set provides 2 to halve the thrust bearing wea..

$59.46 Ex Tax:$51.70

Type 4 Lifter bore conversion Kit to Type 1 Lifters

Type 4 Lifter bore conversion Kit to Type 1 Lifters

This kit allows you to convert your Type 4 to use the wider range of performance Type 1 lifters Sol..

$391.18 Ex Tax:$340.16

Manton Performance Chromoly Push Rods Cut to length

Manton Performance Chromoly Push Rods Cut to length

These Chromoly Push Rods are manufactured from select hard drawn seamless 4130 Condition N 3/8" tubi..

$373.70 Ex Tax:$324.96

VW Stock grind camshaft with gear (+2) New not rebuilt

VW Stock grind camshaft with gear (+2) New not rebuilt

Fits 1200cc(40hp)-1600cc Type 1/2/3 Engines Stock grind camshaft new with gear This has the oversi..

$0.00 Ex Tax:$0.00

VW Cam Follower (Lifter) Standard (Set of 8) Genuine Volkswagen

VW Cam Follower (Lifter) Standard (Set of 8) Genuine Volkswagen

These are the best "stock" lifters we have found for stock Type 1 camshafts, we have had outstanding..

$205.62 Ex Tax:$178.80

VW Cam follower (Lifter) Standard (Set of 8)

VW Cam follower (Lifter) Standard (Set of 8)

Never install and new camshaft without new compatible lifters. Sold as a set of 8 lifters to do on..

$191.13 Ex Tax:$166.20

VW Main Bearing Set Type 1 based engine +80" and -20" on the crank (2mm Thrust)

VW Main Bearing Set Type 1 based engine +80" and -20" on the crank (2mm Thrust)

1200-1600cc Main Bearings Set, Steel backed for extra strength , these bearings are a excellent bear..

$0.00 Ex Tax:$0.00

VW Main Bearing Set Type 1 based engine +60" and -10" on the crank (2mm Thrust)

VW Main Bearing Set Type 1 based engine +60" and -10" on the crank (2mm Thrust)

1200-1600cc Main Bearings Set, Steel backed for extra strength , these bearings are a excellent bear..

$156.01 Ex Tax:$135.66

VW Engine Case Heavy Duty "Bubble Top" 94mm machined for Sand Seal

VW Engine Case Heavy Duty "Bubble Top" 94mm machined for Sand Seal

Engine Case, with 10mm or 8mm head studs bosses, and spigots for 94mm cylinders and machined for san..

$0.00 Ex Tax:$0.00

VW Engine Case Heavy Duty "Bubble Top" 90.5/92mm With Sand Seal machined snout

VW Engine Case Heavy Duty "Bubble Top" 90.5/92mm With Sand Seal machined snout

Engine Case, with 10mm or 8mm head studs bosses, and spigots for  90.5/92mm cylinders..

$2,530.00 Ex Tax:$2,200.00

Performance CamShaft 394L / 244D for 1.1 Rockers performance (Stage 2)

Performance CamShaft 394L / 244D for 1.1 Rockers performance (Stage 2)

Mild Street Performance Cam for your Air Cooled Type 1 VW Help your engine breathe easier with a pe..

$286.98 Ex Tax:$249.55

High Performance Camshaft kit Stage 2

High Performance Camshaft kit Stage 2

This kit is a great way to buy all you need in an engine build at a discounted price as it's in a pa..

$539.98 Ex Tax:$469.55

Tags: cam, follower, lifter, performace, oiler, camshaft,