Engine Bearings, Big Ends, Main Bearings, Cam Bearings, Small End Bearings

Big End Bearings +0.50mm (+0.20")

Big End Bearings +0.50mm (+0.20")

VW Big end (Rod Bearing) Sets, 1200 to 1600cc Engines are excellent bearings for up to around 160hp...

$55.74 Ex Tax:$48.47

Big End Bearings +0.75mm (+0.30)

Big End Bearings +0.75mm (+0.30)

VW Big end (Rod Bearing) Sets, 1200 to 1600cc Engines are excellent bearings for up to around 160hp...

$48.08 Ex Tax:$41.81

Big End Bearings +1.00mm (+0.40

Big End Bearings +1.00mm (+0.40

VW Big end (Rod Bearing) Sets, 1200 to 1600cc Engines are excellent bearings for up to around 160hp...

$0.00 Ex Tax:$0.00

Big End bearings 25-36 HP. engines, .50 mm, set

Big End bearings 25-36 HP. engines, .50 mm, set

Also referred to as   -20" These are Old stock, and are quality bearings but the boxes may be ..

$46.00 Ex Tax:$40.00

Big End bearings 25-36 HP. engines, .75 mm, set

Big End bearings 25-36 HP. engines, .75 mm, set

Also referred to as   -30" These are Old stock, and are quality bearings but the boxes may be in po..

$17.25 Ex Tax:$15.00

Big End bearings 25-36 HP. engines, 1.00 mm, set

Big End bearings 25-36 HP. engines, 1.00 mm, set

Also referred to as   -40" These are Old stock, and are quality bearings but the boxes may be in po..

$17.25 Ex Tax:$15.00

Camshaft bearing set Standard with Double thrust

Camshaft bearing set Standard with Double thrust

Stock VW Cam bearings only had 1 thrust bearing, this set provides 2 to halve the thrust bearing wea..

$59.46 Ex Tax:$51.70

Crankshaft Oil Slinger/Thrower VW Beetle 1961 on VW Kombi 1961 to 1967, also VW Kombi with 1600cc engine 1968 to 1979

Crankshaft Oil Slinger/Thrower VW Beetle 1961 on VW Kombi 1961 to 1967, also VW Kombi with 1600cc engine 1968 to 1979

Crankshaft oil thrower washer. Located within the nose of the case, on the crank. Helps to..

$5.99 Ex Tax:$5.21

Distributor Drive Pinion (Type 1 Engines)

Distributor Drive Pinion (Type 1 Engines)

Distributor Drive Pinion, This is the vertical gear that is driven by the brass distributor dri..

$91.72 Ex Tax:$79.76

Gland Nut Spigot Bearing

Gland Nut Spigot Bearing

Transmission Input Shaft Pilot Bearing (In Gland Nut),  This is inside the gland nut on 1200-1600cc..

$6.51 Ex Tax:$5.66

Gudgeon Bush 1200cc Type 1

Gudgeon Bush 1200cc Type 1

Small end bush for 25 and 36 and 40HP Engines that have the 20mm Gudgeon Pin   Sold each..

$19.06 Ex Tax:$16.57

Main Bearing Set Type 1 based engine +20 -30" on the crank

Main Bearing Set Type 1 based engine +20 -30" on the crank

1200-1600cc Main Bearings Set, Steel backed for extra strength , these bearings are a excellent bear..

$103.01 Ex Tax:$89.57

Main Bearing Set Type 1 based engine +20 and -10" on the crank

Main Bearing Set Type 1 based engine +20 and -10" on the crank

1200-1600cc Main Bearings Set, Steel backed for extra strength , these bearings are a excellent bear..

$171.80 Ex Tax:$149.39

Main Bearing Set Type 1 based engine +20 and -20 on the crank (2mm thrust)

Main Bearing Set Type 1 based engine +20 and -20 on the crank (2mm thrust)

1200-1600cc Main Bearings Set, these are the steel backed bearings for extra duarabilty these bearin..

$153.95 Ex Tax:$133.87

Main Bearing Set Type 1 based engine +40 and -20" on the crank

Main Bearing Set Type 1 based engine +40 and -20" on the crank

1200-1600cc Main Bearings Set, Steel backed for extra strength , these bearings are a excellent bear..

$138.53 Ex Tax:$120.46

Showing 1 to 15 of 34 (3 Pages)