Engine Case, with 10mm or 8mm head studs bosses, and spigots for 94mm cylinders and machined for sand seal.
Constructed from a high-quality aluminium alloy for strength and fully CNC machined.
The "Bubble Top" name refers to its raised roof design that allows clearance for up to 84mm stroker crankshafts and rods without having to much additional clearancing, also the area behind number three cylinder is filled in and reinforced to add material and strength to the case as well. It comes drilled for full flow with plugs supplied and also features shuffle pins on the centre mains.
The universal case design allows it to be used for Type 1, 2 & 3 engines.
VW Engine Case Heavy Duty "Bubble Top" 94mm machined for Sand Seal
- Brands EMPI
- Product Code:EMPI-98-0467-B
- Availability:Pre-Order
-
$0.00
- Ex Tax:$0.00
Related Products
VW Cam follower (Lifter) with extra oil hole (Set of 8)
Made from one piece Chromoly billets and then precision ground and heat treated. These are th..
$208.47 Ex Tax:$181.28
EMPI HPMX 40 Carburettor
Carburettor with chrome velocity stacks Jets are .52 idles 115 Mains 200 Air corrector Jet..
$0.00 Ex Tax:$0.00
Sealant and Gasket maker 50mls (Loctite 518 Brand)
50ml Tube This is the sealant we use in our own workshop, we have tried many and we have foun..
$44.36 Ex Tax:$38.57
Crank Shaft 76mm Counterweighted and 8 doweled
This is a Brand New Forged 4140 Chromoly Counterweighted Crankshaft for for 1300cc, 1500cc and 1600c..
$0.00 Ex Tax:$0.00
Crank Shaft 78mm Counterweighted and 8 doweled
This is a Brand New Forged 4140 Chromoly Counterweighted Crankshaft for for 1300cc, 1500cc and 1600c..
$789.10 Ex Tax:$686.17
VW Main Bearing Set Type 1 based engine Standard on case, Standard on Crank (Steel Backed centre main)
1200-1600cc Main Bearings Set, Steel backed for extra strength , these bearings are a excellent bear..
$187.75 Ex Tax:$163.26
VW Oil Pressure switch
On older engines this switch may cause minor oil leak, and when he no longer works for major engine ..
$26.86 Ex Tax:$23.36
VW Engine Gasket Set/kit With Flywheel Seal, for 1200 (40HP)/1300/1500/1600cc Engines
Engine Gasket Set With Flywheel Seal, for 1200 (40HP)/1300/1500/1600cc Engines The Metric Nut Ltd o..
$56.20 Ex Tax:$48.87
Oil Pump 26mm gear 8mm stud holes (Flat Camshaft)
Schadek 26mm Oil Pump, 8mm Pump Studs fits late Type 1/2/3s with 1500-1600cc based engines. A 26mm p..
$141.40 Ex Tax:$122.96
T-piece, M10 x 1 for use oil pressure senders
T-piece allows installation of two devices in the oil pressure gallery hole. One M10 x 1.0 fe..
$0.00 Ex Tax:$0.00
Billet aluminium sump plate 1200cc to 1600cc style engines
This billet aluminum sump plate will never bend or distort due to over-tightening, unlike stock plat..
$90.05 Ex Tax:$78.30
Heavy duty EMPI cast steel Full Flow oil pump cover
Heavy duty EMPI cast steel oil pump cover is tapped for a full flow oil system fits all VW pumps wit..
$102.82 Ex Tax:$89.41
Cam plug Billet with o-ring
Use this Billet cam plug during engine assembly for a secure, leak free seal. Case must be one that ..
$0.00 Ex Tax:$0.00
VW Vertical oil filler with grooved alloy cap.
Tired of oil spilling all over when you try to add It to your motor? This new design makes it much e..
$108.23 Ex Tax:$94.11
VW Type 1 Engine Case
VW Magnesium Engine Case AS41 style, this is the best engine case you can use for your new engine.&n..
$1,942.34 Ex Tax:$1,688.99
CB Performance Panchito 044™ (40 x 35.5) 90.5/92 Bore (Pair)
CB Performance is setting standards with VW cylinder head innovation. There latest in-house design i..
$2,251.54 Ex Tax:$1,957.86
Camshaft bearing set Standard with Double thrust
Stock VW Cam bearings only had 1 thrust bearing, this set provides 2 to halve the thrust bearing wea..
$93.96 Ex Tax:$81.70
Main Bearing Set VW Type 1 based engine +80 and standard on the crank
1200-1600cc Main Bearings Set, Steel backed for extra strength , these bearings are a excellent bear..
$178.18 Ex Tax:$154.94
VW Main Bearing Case Dowel Pin
This genuine VW dowel pin locates the main baring into the crank case and fits all 1200cc–1600c..
$1.87 Ex Tax:$1.63
VW Cam Plug (Rubber)
Cam Plug non-Metal for Un-Grooved Cases Type 1, 2, 3, and 4 040 101 157 seals the 2 case h..
$0.00 Ex Tax:$0.00
VW Engine Case Hardware Kit
This kit includes the oil relief pistons, springs,studs, cover plates, etc to make a new engine case..
$74.50 Ex Tax:$64.78
VW Oil Pressure Relief Valve and Spring Kit, Dual Relief
Heavy duty oil pressure relief valves and springs for dual-relief cases...
$31.91 Ex Tax:$27.75
VW Oil cooler mount adaptor "Doghouse"
Mounts the oil cooler to the case on doghouse style engines, or can be used when converting a single..
$116.38 Ex Tax:$101.20
VW Sump plate kit with drain plug and gasket kit
With every service it is necessary to oil strainer to clean or replace. Many Type 1 and Type 3 ..
$26.28 Ex Tax:$22.85
VW Oil Pump 30mm gears and 8mm stud holes
Schadek 30mm Oil Pump, 8mm Pump Studs This pump fits late Type 1/2/3s with 1500-1600cc based en..
$0.00 Ex Tax:$0.00
Metric M10x70mm Zinc Plated Upper Engine Bolt
The 10x70mm Metric Zinc Plated Bolt has a 10x1.5mm pitch, 70mm long thread. The bolt has a 17mm..
$4.45 Ex Tax:$3.87
VW 92mm (Thick Wall) Piston Barrel Kit for stroker engines (2180cc)
This is a new set of thick wall 92mm VW air-cooled Type 1 pistons and cylinders. These cylinder..
$930.53 Ex Tax:$809.16
Cam Plug, Metal for Grooved Cases, VW Type 1, 2, 3, and 4
Seals the 2 case half's at the flywheel end. 29.9mmThese often get corroded or bent to the poin..
$8.69 Ex Tax:$7.56
Engine Case Sealing Nut, Main Studs
Engine Case Sealing Nut, Main Studs.Nuts that secure the main bearing saddles in the case. The ..
$10.11 Ex Tax:$8.79
CB Performance Panchito 044™ (40 x 35.5) 94mm Bore (Pair)
61cc ChambersCB Performance is setting standards with VW cylinder head innovation. There latest in-h..
$2,251.54 Ex Tax:$1,957.86
Tags: engine, case, performance, AS21, AS41, engine, case, crank, case, block, bubble, case, performace,