Also called Clutch Pilot Tool
This fits all models of early air-cooled VW with standard transmissions except Type 4 engines.
It simply centres the disc when you install the pressure plate, so the transmissions input shaft slips right in when you mate the two together.
Tool Purchases are NON-RETURNABLE
If you are looking for the tool for a Type 4 engine we have it listed here
VW Clutch Alignment Tool (Type 1 engines)
- Brands Original Supplier to Volkswagen
- Product Code:5302
- Availability:In Stock
-
$8.56
- Ex Tax:$7.44
Related Products
Clutch Pressure Plate for VW Beetle, Karmann Ghia, Type 3 and Kombi up to 1967 (180mm Dia.)
This will do the clutch job properly, since a "cheap" one will just change the disc. ..
$271.57 Ex Tax:$236.15
VW Clutch disc 200mm Sprung Centre
We have found these discs to be the best, even better than the German made disc's. For best operati..
$110.98 Ex Tax:$96.50
Clutch Release Bearing Early Style (Economy Version)
Fits all Beetle's, Kombi's, Karmann Ghia's and Type 3's up to 1970 Economy Version The easiest..
$0.00 Ex Tax:$0.00
Pressure Plate 210mm Kombi 1972 to 1975
This clutch pressure plate was used on 1972 to 1974 Type 4 engines in the VW Kombi. T..
$404.55 Ex Tax:$351.78
KEP Performance Pressure Plate Stage 1 1700lb (200mm)
Pressure plate stage 1 Kennedy 1700lb 200mm, is a good plate to fit to any Mild, Offroad or Hig..
$0.00 Ex Tax:$0.00
VW Clutch release bearing clips heavy duty (Early cars up to 1971) Pair
The stock VW clutch release bearing clip (The "U" shaped design) is a poor design, these heavy duty ..
$6.12 Ex Tax:$5.32
VW Clutch cable adjusting Wing Nut
This is used on almost all air-cooled VW's that use a clutch cable. Includes Beetle, Type 3’s, Komb..
$10.98 Ex Tax:$9.55
Pressure Plate 215mm Kombi 1974 to 1975
This clutch pressure plate was used on 1974 to 1975 Type 4 engines in the VW Kombi. Also Fits Vanago..
$0.00 Ex Tax:$0.00
VW Clutch Release Bearing Late Style (Quality Option)
Fits all VW Beetle's, Kombi's, Karmann Ghia's and Type 3's from 1971 and on Quality Sachs HD bearin..
$118.54 Ex Tax:$103.08
Quality Early Clutch kit 200mm with alignment tool for VW Beetle, Karmann Ghia, Type 3 and Kombi
This is the early 200mm style kit with the centre pad and is a quality kit with a sprung drive ..
$388.36 Ex Tax:$337.70
Quality Late Clutch kit 200mm with alignment tool for VW Beetle, Karmann Ghia, Type 3 and Kombi
This is the later 200mm style kit with the centre pad missing and is a quality kit with a sprun..
$388.36 Ex Tax:$337.70
VW Clutch Release Bearing Early Style (Quality Version)
Fits all Beetle's, Kombi's, Karmann Ghia's and Type 3's up to 1970 This is a quality release&n..
$111.06 Ex Tax:$96.57
Gland Nut Spigot Bearing
Transmission Input Shaft Pilot Bearing (In Gland Nut), This is inside the gland nut on 1200-1600cc..
$6.51 Ex Tax:$5.66
Clutch Cable VW Beetle 1971 to 1974
This GEMO quality clutch cable (2281mm) fits all VW Beetles 1971 to 1974 1302 and 1303 GEMO..
$32.83 Ex Tax:$28.55
Quality Early Clutch kit 180mm with alignment tool for VW Beetle, Karmann Ghia, Type 3 and Kombi
This is the early 180mm style kit with the centre pad and is a quality kit. This clutch kit wa..
$453.72 Ex Tax:$394.54
VW Engine/Gearbox Bench Mount Stand (Aircooled Engines)
This Volkswagen Bench Mount Engine Stand is compatible with Type 1 engines. The stand..
$0.00 Ex Tax:$0.00
Clutch plate 215mm VW Kombi 1974 to 1975
Sachs Clutch Disc Spring Hub 215mm T4/914/Waterbox 68 to 85..
$270.91 Ex Tax:$235.57
KEP Performance Pressure Plate Stage 2 2100lb (200mm)
Kennedy Engineering Performance Stage 2 2100lb pressure plate. This pressure plate is a great o..
$0.00 Ex Tax:$0.00
EMPI Performance Pressure Plate Stage 1 1700lb (200mm)
Pressure plate stage 1 1700lb 200mm, is a good plate to fit to any Mild, Offroad or High ..
$367.75 Ex Tax:$319.78
VW Clutch Alignment Tool (Type 4 engines)
Also called Clutch Pilot Tool This fits all models of early air-cooled VW with standard transmissio..
$9.71 Ex Tax:$8.44