• Flywheel Bolt (Gland Nut) VW 1300 to 1600 style engines

VW Beetle 1961 to 1979,

VW Kombi 1960 to 1979 (with Type 1 based engine)

VW Type 3 1962 to 1972 

VW Karmann Ghia 1961 to 1974

This is the bolt that holds the flywheel the crankshaft on VW Upright Engines, and also Type 3's. 

This comes WITH the Needle Bearing (Pilot Shaft Bearing) inside the gland nut too.

Make sure to torque this to spec of 35 mkg (253 ft·lbf)

Note: Will not fit automatics also will not fit 36HP and some 1200cc 40HP engines as the threads are to long.

Write a review

Note: HTML is not translated!
   Bad           Good
Captcha

Flywheel Bolt (Gland Nut) VW 1300 to 1600 style engines

  • $45.56

  • Ex Tax:$39.62

Related Products

VW Engine Case Heavy Duty "Bubble Top" 90.5/92mm

VW Engine Case Heavy Duty "Bubble Top" 90.5/92mm

Engine Case, with 10mm or 8mm head studs bosses, and spigots for  90.5/92mm cylinders..

$0.00 Ex Tax:$0.00

Clutch Pressure Plate for VW Beetle, Karmann Ghia, Type 3 and Kombi up to 1967 (180mm Dia.)

Clutch Pressure Plate for VW Beetle, Karmann Ghia, Type 3 and Kombi up to 1967 (180mm Dia.)

This will do the clutch job properly, since a "cheap" one will just change the disc.    ..

$271.57 Ex Tax:$236.15

VW Chromoly Flywheel Bolt Heavy Duty made by CB Performance

VW Chromoly Flywheel Bolt Heavy Duty made by CB Performance

CB Performance Gland Nut Don't take your chances on stock Flywheel Bolt (Gland Nut) performance app..

$78.56 Ex Tax:$68.31

8mm Competition Dowel Pin set

8mm Competition Dowel Pin set

These Longer Length Dowel Pins Fit Deeper Into The Crankshaft To Protect Against Shearing Under..

$63.99 Ex Tax:$55.64

VW Clutch disc 200mm Sprung Centre

VW Clutch disc 200mm Sprung Centre

We have found these discs to be the best, even better than the German made disc's. For best operati..

$110.98 Ex Tax:$96.50

VW Clutch disc 180mm Dia. (Ridged)

VW Clutch disc 180mm Dia. (Ridged)

This is the ridged type disc and is our choice for the every application, as well as Off Road.For be..

$207.66 Ex Tax:$180.57

KEP Performance Pressure Plate Stage 1 1700lb (200mm)

KEP Performance Pressure Plate Stage 1 1700lb (200mm)

Pressure plate stage 1 Kennedy 1700lb 200mm, is a good plate to fit to any Mild, Offroad or Hig..

$0.00 Ex Tax:$0.00

Flywheel Shim, 1300-1600cc Engines, .24mm (.010')

Flywheel Shim, 1300-1600cc Engines, .24mm (.010')

Flywheel Shim, 1300 to 1600cc style engines, .24mm (.010") This is used to take up the excessive ga..

$4.51 Ex Tax:$3.92

Flywheel Shim, 1300-1600cc Engines, 0.32mm

Flywheel Shim, 1300-1600cc Engines, 0.32mm

Flywheel Shim, 1300 to 1600cc style engines,  0.32mm  This is used to take up the excessi..

$4.51 Ex Tax:$3.92

Gland Nut Spigot Bearing

Gland Nut Spigot Bearing

Transmission Input Shaft Pilot Bearing (In Gland Nut),  This is inside the gland nut on 1200-1600cc..

$6.51 Ex Tax:$5.66

Quality Early Clutch kit 180mm with alignment tool for VW Beetle, Karmann Ghia, Type 3 and Kombi

Quality Early Clutch kit 180mm with alignment tool for VW Beetle, Karmann Ghia, Type 3 and Kombi

This is the early 180mm style kit with the centre pad and is a quality kit. This clutch kit wa..

$453.72 Ex Tax:$394.54

VW Stock Flywheel 200mm 12 Volt 4 Dowel (Economy)

VW Stock Flywheel 200mm 12 Volt 4 Dowel (Economy)

Stock Flywheel, 200mm, 12 Volt, 4 Dowel, Economy.  This is a good quality flywheel for stock e..

$266.14 Ex Tax:$231.43

Starter Motor D-Bolt for VW Kombi 1950 and 1975 and All VW Beetles

Starter Motor D-Bolt for VW Kombi 1950 and 1975 and All VW Beetles

Replacement starter motor D-bolt. Fits VW Beetles from 1946 to 2003, VW T2 Split Screens from 1950 t..

$6.01 Ex Tax:$5.23

EMPI Performance Pressure Plate Stage 1 1700lb (200mm)

EMPI Performance Pressure Plate Stage 1 1700lb (200mm)

Pressure plate stage 1  1700lb 200mm, is a good plate to fit to any Mild, Offroad or High ..

$367.75 Ex Tax:$319.78

VW Engine Case Heavy Duty "Bubble Top" 90.5/92mm With Sand Seal machined snout

VW Engine Case Heavy Duty "Bubble Top" 90.5/92mm With Sand Seal machined snout

Engine Case, with 10mm or 8mm head studs bosses, and spigots for  90.5/92mm cylinders..

$2,530.00 Ex Tax:$2,200.00

11/32" Competition Dowel Pin set

11/32" Competition Dowel Pin set

These Longer Length Dowel Pins Fit Deeper Into The Crankshaft To Protect Against Shearing Under High..

$55.94 Ex Tax:$48.64

Heavy Duty Gland Nut Washer

Heavy Duty Gland Nut Washer

Heavy Duty Gland Nut Washer Only For VW Air-cooled Engines. Extra Strength Chromoly Steel Washe..

$16.93 Ex Tax:$14.72

Tags: flywheel, nut, gland, bolt, crankshaft,