This is a Brand New Forged 4140 Chromoly Counterweighted Crankshaft for for 1300cc, 1500cc and 1600cc based engines.
These cranks are Nitrided for strength and micro polished.
Standard VW Rod Journal
Main Journals: 2.165"(55.00mm)
Rod Journals: 2.165"(55.00mm)
Counter weight crankshafts are better for the life of you engine, as they are more balanced to do not "hammer" the case and bearings with unbalanced weight.
We recommend that you remove the dowels and have the flywheel end checked for flatness.
8 Doweled
Crank Shaft 78mm Counterweighted and 8 doweled
- Brands Other
- Product Code:EMPI-8181
- Availability:In Stock
-
$789.10
- Ex Tax:$686.17
Related Products
VW Engine Case Heavy Duty "Bubble Top" 90.5/92mm
Engine Case, with 10mm or 8mm head studs bosses, and spigots for 90.5/92mm cylinders..
$0.00 Ex Tax:$0.00
VW Crankshaft Installation Kit
This kit has everything you need to install a crankshaft into a 1200-1600cc VW engine. Includes, Ne..
$304.87 Ex Tax:$265.10
VW Crank Shaft 69mm Counterweighted and 8 doweled Forged 4140 Chromoly
This is a Brand New Forged 4140 Chromoly Counterweighted Crankshaft for for 1300cc, 1500cc and 1600c..
$0.00 Ex Tax:$0.00
Crank Shaft 76mm Counterweighted and 8 doweled
This is a Brand New Forged 4140 Chromoly Counterweighted Crankshaft for for 1300cc, 1500cc and 1600c..
$0.00 Ex Tax:$0.00
VW Engine Case Heavy Duty "Bubble Top" 94mm
Engine Case, with 10mm or 8mm head studs bosses, and spigots for 94mm cylinders Constructed from a ..
$0.00 Ex Tax:$0.00
EMPI HPMX Dual 44mm ***Ultra*** carb kit for VW Type 1 engines
EMPI's HPMX carburettors are some of the best in the industry. In a head-to-head compariso..
$0.00 Ex Tax:$0.00
VW Big End Bearings STD Type 1 (Rod bearings)
VW Big end (Rod Bearing) Sets, 1200 to 1600cc Engines are excellent bearings for up to around 160hp...
$55.98 Ex Tax:$48.68
Crank Shaft 74mm Forged 4140 Chromoly Counterweighted and 8 doweled
This is a Brand New Forged 4140 Chromoly Counterweighted Crankshaft for for 1300cc, 1500cc and 1600c..
$781.60 Ex Tax:$679.65
Woodruff Key, Crankshaft Pulley On Nose of Crankshaft
This is the "key" for the pulley to the engine's crankshaft and prevents the pulley from spinning on..
$3.57 Ex Tax:$3.10
EMPI HPMX Dual 40mm Ultra carb kit for VW Type 1 engines
EMPI's HPMX carburettors are some of the best in the industry. In a head-to-head compariso..
$0.00 Ex Tax:$0.00
Crankshaft Gear Spacer 1961 and on
This spacer goes between the gears at the end of a VW crankshaft. A must when replacing the gear s..
$19.90 Ex Tax:$17.30
Crankshaft Oil Slinger/Thrower VW Beetle 1961 on VW Kombi 1961 to 1967, also VW Kombi with 1600cc engine 1968 to 1979
Crankshaft oil thrower washer. Located within the nose of the case, on the crank. Helps to..
$5.99 Ex Tax:$5.21
Distributor Drive Gear, Brass Crank Gear, 1200-1600cc, and T4 Engines
This is a delicate brass gear often burred or chewed up by non-perfect distributor drive pinion inst..
$108.73 Ex Tax:$94.55
Chromoly Flywheel, 12-Volt, 200mm Lightened (13lbs)
Chromoly Flywheel, 12-Volt, 200mmThis chromoly version of our lightened flywheel is the answer for a..
$439.42 Ex Tax:$382.10
Chromoly Gland Nut (Type 1 style engines) Economy option.
Don't take a chance on stock gland nuts in high performance applications. This ultra strong gla..
$0.00 Ex Tax:$0.00
CB Performance Dual Weight Chromoly Flywheel (o-ring seal)
The CB Performance Dual Weight Chromoly Flywheel was designed with quality and versatility..
$454.91 Ex Tax:$395.57
Woodruff Key for Crankshaft Timing gear
Woodruff Key, Crankshaft Timing Gear, 8x13x32mmLocates the crankshaft timing gear, which drives the ..
$4.05 Ex Tax:$3.52
5.500" I-Beam Connecting Rods, Type 1 Journals, Set of 4
5.500" I-Beam Connecting Rods,Type 1 Journals.Set of 4 begin as new chromoly forgings instead of use..
$0.00 Ex Tax:$0.00
VW Engine Case Heavy Duty "Bubble Top" 94mm machined for Sand Seal
Engine Case, with 10mm or 8mm head studs bosses, and spigots for 94mm cylinders and machined for san..
$0.00 Ex Tax:$0.00
VW Engine Case Heavy Duty "Bubble Top" 90.5/92mm With Sand Seal machined snout
Engine Case, with 10mm or 8mm head studs bosses, and spigots for 90.5/92mm cylinders..
$2,530.00 Ex Tax:$2,200.00
Tags: 78mm, crank, counter, stroker, crankshaft,