Heavy duty EMPI cast steel oil pump cover is tapped for a full flow oil system fits all VW pumps with 8mm bolt holes.
Fitting and gasket included.
Heavy duty EMPI cast steel Full Flow oil pump cover
- Brands EMPI
- Product Code:EMPI-31-2940
- Availability:In Stock
-
$102.82
- Ex Tax:$89.41
Related Products
Full Flow Oil Pump
EMPI Full Flow Oil Pump for engines fitted with a "flat camshaft wheel" (Stock engines up to 1970 or..
$0.00 Ex Tax:$0.00
VW Engine Case Heavy Duty "Bubble Top" 90.5/92mm
Engine Case, with 10mm or 8mm head studs bosses, and spigots for 90.5/92mm cylinders..
$0.00 Ex Tax:$0.00
90˚ Oil fitting NPT 3/8" Male x 3/8" Female
NPT 3/8" Male x 3/8" Female. Sold each This 90˚ fitting is a low profile back and is ideal for the..
$22.98 Ex Tax:$19.98
Spin on oil filter mount ports left
Mounts a standard spin-on oil filter on the location of your choice on your Volkswagen. In and out..
$54.23 Ex Tax:$47.16
Spin on oil filter mount ports right
Mounts a standard spin-on oil filter on the location of your choice on your Volkswagen. In and out f..
$54.23 Ex Tax:$47.16
Oil return adaptor for full flow systems Type 1 Case
Designed to add a full flow oil system without machining the crankcase. Screws into the rear oil b..
$110.31 Ex Tax:$95.92
Oil Pump 26mm gear 8mm stud holes (Flat Camshaft)
Schadek 26mm Oil Pump, 8mm Pump Studs fits late Type 1/2/3s with 1500-1600cc based engines. A 26mm p..
$141.40 Ex Tax:$122.96
VW Engine Case Heavy Duty "Bubble Top" 94mm
Engine Case, with 10mm or 8mm head studs bosses, and spigots for 94mm cylinders Constructed from a ..
$0.00 Ex Tax:$0.00
Oil Thermostat
Mounts in-line and bypasses oil cooler until oil warms up to approximately 175F degrees. Always par..
$180.21 Ex Tax:$156.70
Oil Hose/line 1/2" High temperature and High pressure (300mm increments)
High Temperature / High Pressure Oil Hose for use with oil coolers and/or remote oil filter. ..
$11.39 Ex Tax:$9.90
Oil Cooler Sandwich Plate with Thermostat
Features: • 80 ˚C thermostat • 3/4 UNF oil filter thread • 5/8 BSP pipe fit..
$140.93 Ex Tax:$122.55
Loctite 567 Thread Sealant 50mls
LOCTITE 567 Off-white, low disassembly strength methacrylate thread sealant, ideal for sealing coar..
$45.51 Ex Tax:$39.57
VW Oil Pump 30mm gears and 8mm stud holes
Schadek 30mm Oil Pump, 8mm Pump Studs This pump fits late Type 1/2/3s with 1500-1600cc based en..
$0.00 Ex Tax:$0.00
Brass 3/8" Tail end for oil lines
There are manufactured using a special beaded barb design to provide an unparalleled security a..
$11.48 Ex Tax:$9.98
Oil Pump 26mm gear 8mm stud holes (Dished Cam)
Schadek 26mm Oil Pump, 8mm Pump Studs fits late Type 1/2/3s with 1500-1600cc based engines. A 26mm p..
$101.79 Ex Tax:$88.51
VW Dry Sump Oil Pump CB Performance
The oil pump that helps your engine make power. CB's 4 Gear Dry Sump Oil Pump is easy to install..
$0.00 Ex Tax:$0.00
Oil Cooler 16 Row 8AN AN-8 Fittings -Black
Additional 16 row oil cooler. Overall dimensions 340 x 150 x 50 mm. Thread of the inlet an..
$0.00 Ex Tax:$0.00
Oil Fitting -8AN to 3/8 NPT (Black)
Brand new aftermarket product.Made of high quality aluminium.Color: Black8AN to 3/8'' NPT (Male to M..
$14.46 Ex Tax:$12.57
Fitting Hose End 90 Degree Full Flow -8AN (Black)
Brand new aftermarket product.High Flow versionMade of high quality aluminium.Color: Black-8AN Swive..
$0.00 Ex Tax:$0.00
-8AN Straight Female Aluminium Hose End (Black)
Brand new aftermarket product.Made of high quality aluminium.Color: Black-8AN Female to -8AN Hose St..
$19.06 Ex Tax:$16.57
Full Flow Filter mount VW Beetle's to 1973
Under rear guard Oil Filter Mount, Beetle up to 1973EMPI'S Bolt On Full Flow Oil Filter Mounts Make ..
$54.34 Ex Tax:$47.25
VW Engine Case Heavy Duty "Bubble Top" 94mm machined for Sand Seal
Engine Case, with 10mm or 8mm head studs bosses, and spigots for 94mm cylinders and machined for san..
$0.00 Ex Tax:$0.00
Fitting Hose End 90 Degree -8AN (Black)
Made of high quality aluminium.Color: Black-8AN Swivel to 3/8'' NPT -8AN ..
$32.86 Ex Tax:$28.57
VW Engine Case Heavy Duty "Bubble Top" 90.5/92mm With Sand Seal machined snout
Engine Case, with 10mm or 8mm head studs bosses, and spigots for 90.5/92mm cylinders..
$2,530.00 Ex Tax:$2,200.00
Oil Pump 21mm gear 8mm stud holes (Flat Cam) - Dual releif case 15mm inlet galley
Schadek 21mm Oil Pump, 8mm Pump Studs fits late Type 1/2/3s with 1500-1600cc based engines.Fits 1970..
$117.96 Ex Tax:$102.57
Tags: oil, pump, cover, steel, plate, full, flow, oil, filter,