Engine Case, with 10mm or 8mm head studs bosses, and spigots for 90.5/92mm cylinders
Constructed from a high-quality aluminium alloy for strength and fully CNC machined.
The "Bubble Top" name refers to its raised roof design that allows clearance for up to 84mm stroker crankshafts and rods without having to much additional clearancing, also the area behind number three cylinder is filled in and reinforced to add material and strength to the case as well. It comes drilled for full flow with plugs supplied and also features shuffle pins on the centre mains.
The universal case design allows it to be used for Type 1, 2 & 3 engines. Head stud inserts are 10mm
90.5/92mm can be chosen from.
94mm cases can be ordered also.
All standard Tinware, pulleys, oil coolers and hardware attached to this as per original case.
If this is out of stock, you could consider the "Sand Seal" Version we also offer available here
VW Engine Case Heavy Duty "Bubble Top" 90.5/92mm
- Brands EMPI
- Product Code:EMPI-98-0463-B
- Availability:Out Of Stock
-
$0.00
- Ex Tax:$0.00
Related Products
Dual EMPI 40 HPMX Kit with Billet Aluminum Air Cleaners for Type 1 Beetle, KG and Kombi Engines.
Dual EMPI 40 HPMX Kit with Billet Aluminum Air Cleaners for Type 1 Beetle, KG and Kombi Engines.&nbs..
$0.00 Ex Tax:$0.00
VW Engle W110 Camshaft
Lift 430, Duration 284. Hot street & off road, good low & mid..
$0.00 Ex Tax:$0.00
VW Cam follower (Lifter) with extra oil hole (Set of 8)
Made from one piece Chromoly billets and then precision ground and heat treated. These are th..
$208.47 Ex Tax:$181.28
VW 90.5mm Piston Barrel Kit (1776cc) Hypereutectic Pistons
90.5mm X 69 Crank shaft = 1776cc This is a new set of 90.5mm VW Aircooled Type 1 Pistons and cylind..
$769.15 Ex Tax:$668.83
VW 92mm Piston Barrel Kit (1835cc)
92mm X 69 Crank shaft = 1835cc This is a new set of 92mm VW Aircooled Type 1 Pistons and cylinders...
$556.50 Ex Tax:$483.91
Sealant and Gasket maker 50mls (Loctite 518 Brand)
50ml Tube This is the sealant we use in our own workshop, we have tried many and we have foun..
$44.36 Ex Tax:$38.57
VW Sump Kit Oil change gasket set 1200cc 40hp, 1300cc, 1500cc and 1600cc (Made In Germany)
This is a German made oil change gasket set ( Sump Kit ) for 1200cc 40hp, 1300cc, 1500cc and 1600cc ..
$4.54 Ex Tax:$3.95
VW Engle W120 Camshaft
The Engle W120 is a Hot Street VW Beetle camshaft grind is designed for 1.1 or 1.25 rockers, and it'..
$0.00 Ex Tax:$0.00
Flywheel Bolt (Gland Nut) VW 1300 to 1600 style engines
VW Beetle 1961 to 1979, VW Kombi 1960 to 1979 (with Type 1 based engine) VW Type 3 1962 to 1972&nb..
$45.56 Ex Tax:$39.62
VW Chromoly Flywheel Bolt Heavy Duty made by CB Performance
CB Performance Gland Nut Don't take your chances on stock Flywheel Bolt (Gland Nut) performance app..
$78.56 Ex Tax:$68.31
VW Crank Shaft 69mm Counterweighted and 8 doweled Forged 4140 Chromoly
This is a Brand New Forged 4140 Chromoly Counterweighted Crankshaft for for 1300cc, 1500cc and 1600c..
$0.00 Ex Tax:$0.00
Crank Shaft 76mm Counterweighted and 8 doweled
This is a Brand New Forged 4140 Chromoly Counterweighted Crankshaft for for 1300cc, 1500cc and 1600c..
$0.00 Ex Tax:$0.00
Crank Shaft 78mm Counterweighted and 8 doweled
This is a Brand New Forged 4140 Chromoly Counterweighted Crankshaft for for 1300cc, 1500cc and 1600c..
$789.10 Ex Tax:$686.17
VW Main Bearing Set Type 1 based engine Standard on case, Standard on Crank (Steel Backed centre main)
1200-1600cc Main Bearings Set, Steel backed for extra strength , these bearings are a excellent bear..
$187.75 Ex Tax:$163.26
VW Camshaft bearing set Standard Type 1 engines
Camshaft bearing set Standard Type 1 Based engines..
$80.36 Ex Tax:$69.88
VW 90.5mm Piston and Barrel Kit "B" kit (2110cc)
90.5mm Up to 82mm Crank shaft = 2110cc This is a new set of 90.5mm (B) VW Aircooled Type 1 Pistons ..
$825.73 Ex Tax:$718.03
VW Oil Pressure switch
On older engines this switch may cause minor oil leak, and when he no longer works for major engine ..
$26.86 Ex Tax:$23.36
VW Engine Gasket Set/kit With Flywheel Seal, for 1200 (40HP)/1300/1500/1600cc Engines
Engine Gasket Set With Flywheel Seal, for 1200 (40HP)/1300/1500/1600cc Engines The Metric Nut Ltd o..
$56.20 Ex Tax:$48.87
Oil Pump 26mm gear 8mm stud holes (Flat Camshaft)
Schadek 26mm Oil Pump, 8mm Pump Studs fits late Type 1/2/3s with 1500-1600cc based engines. A 26mm p..
$141.40 Ex Tax:$122.96
Oil Sump Screen or Strainer for all VW engines from 1500cc to 1600cc
Oil Sump Screen or Strainer for all VW aircooled engine from 1500 to 1600cc with the 19mm pick up ho..
$25.96 Ex Tax:$22.57
T-piece, M10 x 1 for use oil pressure senders
T-piece allows installation of two devices in the oil pressure gallery hole. One M10 x 1.0 fe..
$0.00 Ex Tax:$0.00
Billet aluminium sump plate 1200cc to 1600cc style engines
This billet aluminum sump plate will never bend or distort due to over-tightening, unlike stock plat..
$90.05 Ex Tax:$78.30
Heavy duty EMPI cast steel Full Flow oil pump cover
Heavy duty EMPI cast steel oil pump cover is tapped for a full flow oil system fits all VW pumps wit..
$102.82 Ex Tax:$89.41
VW Vertical oil filler with grooved alloy cap.
Tired of oil spilling all over when you try to add It to your motor? This new design makes it much e..
$108.23 Ex Tax:$94.11
VW Type 1 Engine Case
VW Magnesium Engine Case AS41 style, this is the best engine case you can use for your new engine.&n..
$1,942.34 Ex Tax:$1,688.99
Camshaft bearing set Standard with Double thrust
Stock VW Cam bearings only had 1 thrust bearing, this set provides 2 to halve the thrust bearing wea..
$93.96 Ex Tax:$81.70
Crank Shaft 74mm Forged 4140 Chromoly Counterweighted and 8 doweled
This is a Brand New Forged 4140 Chromoly Counterweighted Crankshaft for for 1300cc, 1500cc and 1600c..
$781.60 Ex Tax:$679.65
VW Main Bearing Case Dowel Pin
This genuine VW dowel pin locates the main baring into the crank case and fits all 1200cc–1600c..
$1.87 Ex Tax:$1.63
VW 90.5mm "B" Piston Barrel Kit (Up to 2110cc) Mahle Brand
Mahle Brand Piston Barrel Kit These are considered the best brand available for Air Cooled Volkswag..
$0.00 Ex Tax:$0.00
VW Cam Plug (Rubber)
Cam Plug non-Metal for Un-Grooved Cases Type 1, 2, 3, and 4 040 101 157 seals the 2 case h..
$0.00 Ex Tax:$0.00
VW Engine Case Hardware Kit
This kit includes the oil relief pistons, springs,studs, cover plates, etc to make a new engine case..
$74.50 Ex Tax:$64.78
New connecting rods stock style (set of 4)
For 1300 to 1600c Styles engines Connecting Rods are the vital link between the piston and crank.&..
$0.00 Ex Tax:$0.00
VW Oil Pressure Relief Valve and Spring Kit, Dual Relief
Heavy duty oil pressure relief valves and springs for dual-relief cases...
$31.91 Ex Tax:$27.75
VW Oil cooler mount adaptor "Doghouse"
Mounts the oil cooler to the case on doghouse style engines, or can be used when converting a single..
$116.38 Ex Tax:$101.20
CB Performance 044™ Ultra Mag Plus (42 x 37.5) 90.5/92mm Bore
With 42 x 37.5mm Stainless Steel Valves, CNC Porting, Dual Hi-Rev Springs, Chromoly Retainers, & SUP..
$0.00 Ex Tax:$0.00
VW Sump plate kit with drain plug and gasket kit
With every service it is necessary to oil strainer to clean or replace. Many Type 1 and Type 3 ..
$26.28 Ex Tax:$22.85
VW Oil Pump 30mm gears and 8mm stud holes
Schadek 30mm Oil Pump, 8mm Pump Studs This pump fits late Type 1/2/3s with 1500-1600cc based en..
$0.00 Ex Tax:$0.00
VW Full Flow Oil Pump Cover, 3/8
Made by Bugpack Full Flow Oil Pump Cover, 3/8" NPT Female, Finned Aluminum all VW oil pumps. It's..
$0.00 Ex Tax:$0.00
Metric M10x70mm Zinc Plated Upper Engine Bolt
The 10x70mm Metric Zinc Plated Bolt has a 10x1.5mm pitch, 70mm long thread. The bolt has a 17mm..
$4.45 Ex Tax:$3.87
Cam Plug, Metal for Grooved Cases, VW Type 1, 2, 3, and 4
Seals the 2 case half's at the flywheel end. 29.9mmThese often get corroded or bent to the poin..
$8.69 Ex Tax:$7.56
Engine Case Sealing Nut, Main Studs
Engine Case Sealing Nut, Main Studs.Nuts that secure the main bearing saddles in the case. The ..
$10.11 Ex Tax:$8.79
VW 90.5mm "B" Piston Barrel Kit (Up to 2110cc) Mahle Brand (Forged)
Forged Pistons Mahle Brand Piston Barrel Kit These are considered the best brand available for Air ..
$0.00 Ex Tax:$0.00
VW Engine Case Heavy Duty "Bubble Top" 90.5/92mm With Sand Seal machined snout
Engine Case, with 10mm or 8mm head studs bosses, and spigots for 90.5/92mm cylinders..
$2,530.00 Ex Tax:$2,200.00
Tags: engine, case, performance, AS21, AS41, engine, case, crank, case, block, AS21, AS41, engine, case, crank, case, block, crankcases,