• Flywheel Shim, 1300-1600cc Engines, .24mm (.010')

Flywheel Shim, 1300 to 1600cc style engines, .24mm (.010")

This is used to take up the excessive gap between the main bearing and flywheel, oftern refered to as end float.
 
By using shims of different thicknesses, you can set the gap to spec (.005") to minimize bearing and case wear.
 
Will not fit 36hp and type 4 style engines

Write a review

Note: HTML is not translated!
   Bad           Good
Captcha

Flywheel Shim, 1300-1600cc Engines, .24mm (.010')

  • $4.51

  • Ex Tax:$3.92

Related Products

Flywheel Bolt (Gland Nut) VW 1300 to 1600 style engines

Flywheel Bolt (Gland Nut) VW 1300 to 1600 style engines

VW Beetle 1961 to 1979, VW Kombi 1960 to 1979 (with Type 1 based engine) VW Type 3 1962 to 1972&nb..

$40.96 Ex Tax:$35.62

VW Flywheel O Ring 1300cc to 1600cc engines

VW Flywheel O Ring 1300cc to 1600cc engines

Sealing "O" ring for the flywheel fits manual and automatic flywheels. Fits 1965-1979 Volkswagens w..

$2.50 Ex Tax:$2.17

VW Flywheel lock tool

VW Flywheel lock tool

This Volkswagen universal flywheel lock woks on both 6 and 12 volt flywheels. Bolting&nb..

$42.10 Ex Tax:$36.61

Flywheel Shim, 1300-1600cc Engines, 0.36mm

Flywheel Shim, 1300-1600cc Engines, 0.36mm

Flywheel Shim, 1300 to 1600cc style engines,  0.36mm  This is used to take up the excessive gap bet..

$4.51 Ex Tax:$3.92

Flywheel Shim, 1300-1600cc Engines, 0.32mm

Flywheel Shim, 1300-1600cc Engines, 0.32mm

Flywheel Shim, 1300 to 1600cc style engines,  0.32mm  This is used to take up the excessi..

$4.51 Ex Tax:$3.92

Gland Nut Spigot Bearing

Gland Nut Spigot Bearing

Transmission Input Shaft Pilot Bearing (In Gland Nut),  This is inside the gland nut on 1200-1600cc..

$6.51 Ex Tax:$5.66

VW Stock Flywheel 200mm 12 Volt 4 Dowel (Economy)

VW Stock Flywheel 200mm 12 Volt 4 Dowel (Economy)

Stock Flywheel, 200mm, 12 Volt, 4 Dowel, Economy.  This is a good quality flywheel for stock e..

$266.14 Ex Tax:$231.43

Flywheel Shim, 1300-1600cc Engines, 0.34mm

Flywheel Shim, 1300-1600cc Engines, 0.34mm

Flywheel Shim, 1300 to 1600cc style engines,  0.34mm  This is used to take up the excessi..

$4.51 Ex Tax:$3.92

Tags: flywheel, shim, 0.24mm,