VW Magnesium Engine Case AS41 style, this is the best engine case you can use for your new engine. 
 
Nothing beats the quality of a new stock dual relief magnesium engine case. 
 
They come with a deep-studded #3 cylinder, and have case savers pre-installed in 8mm head stud sizes. 
 
This case is already equipped for the rear engine support on 1968+ Kombi’s and Type 3’s.

We carry these top quality dual relief engine cases for your engine build.

These are the finest Magnesium cases available.
 
These cases come ready for 8mm head studs with case savers already installed. 

Write a review

Note: HTML is not translated!
   Bad           Good
Captcha

VW Type 1 Engine Case

  • Brands Other
  • Product Code:043 101 025OE
  • Availability:In Stock
  • $1,942.34

  • Ex Tax:$1,688.99

Related Products

Complete VW Engine Hardware Kit  (10mm head stud nuts and washers)

Complete VW Engine Hardware Kit (10mm head stud nuts and washers)

159 piece including Tin Screws, Locknuts, Exhaust Nuts, etc. for Type 1 style engines   ..

$88.16 Ex Tax:$76.66

VW Engine Case Heavy Duty "Bubble Top" 90.5/92mm

VW Engine Case Heavy Duty "Bubble Top" 90.5/92mm

Engine Case, with 10mm or 8mm head studs bosses, and spigots for  90.5/92mm cylinders..

$0.00 Ex Tax:$0.00

VW Main Bearing Set Type 1 based engine Standard on case, Standard on Crank (Steel Backed centre main)

VW Main Bearing Set Type 1 based engine Standard on case, Standard on Crank (Steel Backed centre main)

1200-1600cc Main Bearings Set, Steel backed for extra strength , these bearings are a excellent bear..

$187.75 Ex Tax:$163.26

Oil Pump 26mm gear 8mm stud holes (Flat Camshaft)

Oil Pump 26mm gear 8mm stud holes (Flat Camshaft)

Schadek 26mm Oil Pump, 8mm Pump Studs fits late Type 1/2/3s with 1500-1600cc based engines. A 26mm p..

$141.40 Ex Tax:$122.96

VW Engine Case Heavy Duty "Bubble Top" 94mm

VW Engine Case Heavy Duty "Bubble Top" 94mm

Engine Case, with 10mm or 8mm head studs bosses, and spigots for 94mm cylinders Constructed from a ..

$0.00 Ex Tax:$0.00

VW Engine Case Hardware Kit

VW Engine Case Hardware Kit

This kit includes the oil relief pistons, springs,studs, cover plates, etc to make a new engine case..

$74.50 Ex Tax:$64.78

New connecting rods stock style (set of 4)

New connecting rods stock style (set of 4)

For 1300 to 1600c Styles engines Connecting Rods are the vital link between the piston and crank.&..

$0.00 Ex Tax:$0.00

Chromoly cylinder head studs for VW dual port engines with 8mm studs

Chromoly cylinder head studs for VW dual port engines with 8mm studs

Chromoly cylinder head studs for dual port heads with 8mm studs. Head studs come complete with..

$204.11 Ex Tax:$177.49

Captive Nut for Crankcase (When using Dog House Cooler and exit tin)

Captive Nut for Crankcase (When using Dog House Cooler and exit tin)

Captive nut for top left engine mounting bolt. When converting to the dog house cooler and usin..

$20.84 Ex Tax:$18.12

Metric M10x70mm Zinc Plated Upper Engine Bolt

Metric M10x70mm Zinc Plated Upper Engine Bolt

The 10x70mm Metric Zinc Plated Bolt has a 10x1.5mm pitch, 70mm long thread. The bolt has a 17mm..

$4.45 Ex Tax:$3.87

VW 1600cc Dual Port Engine Long Block - (All New)

VW 1600cc Dual Port Engine Long Block - (All New)

ENGINE CASE- AutoLinea, Standard, Stock Aluminium Engine Case CRANKSHAFT- Direct Drilled, 69mm ..

$9,890.00 Ex Tax:$8,600.00

Engine Case Sealing Nut, Main Studs

Engine Case Sealing Nut, Main Studs

Engine Case Sealing Nut, Main Studs.Nuts that secure the main bearing saddles in the case. The ..

$10.11 Ex Tax:$8.79

VW Engine Case Heavy Duty "Bubble Top" 94mm machined for Sand Seal

VW Engine Case Heavy Duty "Bubble Top" 94mm machined for Sand Seal

Engine Case, with 10mm or 8mm head studs bosses, and spigots for 94mm cylinders and machined for san..

$0.00 Ex Tax:$0.00

VW Engine Case Heavy Duty "Bubble Top" 90.5/92mm With Sand Seal machined snout

VW Engine Case Heavy Duty "Bubble Top" 90.5/92mm With Sand Seal machined snout

Engine Case, with 10mm or 8mm head studs bosses, and spigots for  90.5/92mm cylinders..

$2,530.00 Ex Tax:$2,200.00

VW 1776cc Dual Port Engine Long Block - (All New)

VW 1776cc Dual Port Engine Long Block - (All New)

ENGINE CASE- AutoLinea, Standard, Stock Aluminium Engine Case CRANKSHAFT- Direct Drilled, 69mm ..

$11,270.00 Ex Tax:$9,800.00

VW 1600cc Dual Port Engine Long Block - (Rebuilt)

VW 1600cc Dual Port Engine Long Block - (Rebuilt)

Twin port and ready to be installed into a Volkswagen Beetle, Kombi, Buggy or Trike.Below is a list ..

$7,242.00 Ex Tax:$6,297.39

Tags: AS21, AS41, engine, case, crank, case, block, crankcases,